Avid Matchmaker Shifter & Brake Lever Mounting Bracket
Matchmaker. The shifter and brake lever are so close together; why can’t they share the same mounting bracket? Hey, there’s an idea! Introducing the AvidMatchmaker. Now you can save weight and clutter on the bar with one clamp that holds Avid levers and SRAM triggers. Definitely a post-graduate course in finishing touches for your rig.
Pair fits X0-X9
Buy Avid Matchmaker Shifter & Brake Lever Mounting Bracket from Chain Reaction Cycles, the world's largest online bicycle store.
Rated 5 out of 5 by Mahaputra Удобная штука
Поставил Эликсир 5 и манетки Х7. Выглядит красиво, фиксируется надежно. На манетке есть 2 варианта положения - 2 отверстия, куда ее прикрутить можно.
Чисто внешне, мне такой хомут больше нравится, чем Мачмейкер Х.
09 March 2014
Rated 4 out of 5 by TrAnd Неоправданно дорогая хрень !!!
Сломал такой же , альтернативы не было - пришлось брать этот же(((( По-русски сказать залу...а !!!
19 January 2014
Rated 5 out of 5 by molecola buona fattura
il risparmio di peso è irrisorio, ma la maggior "pulizia" sul manubrio è evidente. Peccato solo che questi 2 piccoli oggettini costano un po' troppo. Se però la spesa non è un problema, lo consiglio a tutti, inoltre permette una più veloce regolazione dell'inclinazione del blocco cambio/freno dal momento che c'è solo un manettino per entrambi.
05 January 2014
Rated 3 out of 5 by Paulinski Tidy up your bars
This is a good product , but is way overpriced for tiny bit of metal!
24 October 2013
Rated 4 out of 5 by Stevie73 Cleans up the bars
Bought to link my brakes, reverb and gears. Works well but not cheap for what you get.
22 October 2013
Rated 5 out of 5 by Anonymous These thing work well.
These tidied up the bar area really well. They actually allow for more adjustment than I thought they would. One thing to be aware of is the fact that the recommended max torque for the bolts is only 3.4Nm. This isn't much. You could overtorque them using a long handled allen key and pushing it with your little finger. Overtorquing them could lead to failure. I recommend using a torque wrench when installing them.
17 October 2012
Rated 2 out of 5 by Anonymous you snap them just by looking at them
The limitations far outweigh the benefits IMO. I snapped one in the car park getting the bike off the rack. Replaced mine with Hope ones, not so bling, but cheaper stronger and compatible.
01 March 2012
Rated 2 out of 5 by Anonymous Cant reach shifter
If you like to one finger brake, I would not recommend as you have to move your hand to reach the shifter. This might not be as much of a problem if you have a pair because then you can set it up so that the shifter is closer than the bake, but I only have a rear shifter.
22 November 2011