Your complete package for freeride fun. Featuring proven four bar suspension technology, Fox VAN RC rear shock and tough Shimano Zee parts. Go play in the park! The FR FSP4 four bar High Performance 7005 Aluminium frame is perfect for action in the freeride category with 190mm of rear wheel travel with all pivots running on low maintenance and extra durable industrial bearings. The ISCG chainguide mount carries an MRP double chainguide for reliable shifting performance even under extreme usage. Add to this Coil-sprung suspension – a RockShox Domain R Coil fork and FOX Van RC rear shock, Shimano Zee Shadow Plus rear derailleur, an FSA Gravity Moto X 24/36 crank with bashguard, Spank Spike stem and Spike 777Evo handlebar and you have ultimate control for hard freeride usage and in bike parks.
FOX Customised Setup: Sophisticated suspension kinematics are only able
to work correctly if the associated shock is properly
tuned. We researched and found a specific shock setup
in cooperation with Fox Racing Shox, using extensive
testing for almost every CUBE full-suspension model.
X12 Through Axle: In this system, a cone is used to form a play-free connection.
It is only necessary to tighten the axle from one side. The
position of the wheel is done by an insert in the right-hand
dropout which is secured by a bolt. The main advantages
of the Syntace system are quick and simple changing of
the wheel, reliable position of the brake disc and higher
stiffness of the rear of the bike. This allows the assembly
to be made lighter than a conventional through-axle.
FSP4 Link: The key requirement is for continuously active and fully
usable travel, with the rear triangle unaffected by pedalling
or especially braking forces. There are a number of ways
of achieving this – CUBE favours a four pivot chainstay
construction. Here, one of the pivots is located between the
dropout and the chainstay, ensuring that braking does not
have a negative effect on the movement of the rear wheel.
By carefully positioning the remaining pivots, we obtain
the finest riding qualities for our full suspension bikes
both uphill and downhill. This fact is proven by many top
test results in leading magazines over the last few years.
Aluminium Ultralight: Very high tensile strength heat-treated 7005 aluminium
alloy is developed for the highest requirements. It is very
stiff, fatigue resistant, corrosion resistant and non shearing. Cubes Superlite tubes are triple butted, giving
very light tube-sets with a high level of stiffness.
Advanced Hydroforming: Cubes technique achieves custom shapes and
technical advantages which conventional hydroforming
processes cannot. As this manufacturing method
reduces the number of welds, the weight is reduced
while simultaneously increasing the reliability.
Wet Paint Surface: On polished, brushed aluminium and all HPC frames, the
logos and graphics are applied in multi- layer wet paint. Cube
use this surface treatment technology mainly to save weight.
Buy Cube Hanzz Pro Suspension Bike 2013 from Chain Reaction Cycles, the World's Largest Online Bike Store.