16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.
28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 2mm allen Wrench included
Buy DMR Flip Pin Set for Vault Pedal from Chain Reaction Cycles, the world's largest online bicycle store.
Rated 4 out of 5 by Nath8 Direct replacement.
Same as what come with the vaults as standard. I wouldn't bother with anything except silver as the paint/anodising will rub off after a couple of rides anyway.
07 October 2013
Rated 4 out of 5 by Anonymous Sharp pins with crappy paint
Pins are great, the paint is crap and peels right off.
30 June 2013
Rated 4 out of 5 by Anonymous takes time
Hi, two bad point, one takes some time to do, takes hour pear pedal to change pins :O, other bad point is the pins spin off easy, so i had to buy some sealant screw stuff and now stay on :D .
once on look great
four stares :D
12 June 2013
Rated 1 out of 5 by Anonymous very disappointing
Bought these in red to spice up my pedals and before I even opened the pack I experienced the same problem as the other review, the paint was chipped to bits already, I decided to thread one and every single atom of red paint came off! An absolute joke.. Not the fault of crc, just another disappointing item from dmr! And to add insult to injury I've ordered the dmr grub screw set as well... Not pleased
06 June 2013
Rated 3 out of 5 by Anonymous takes time
so i got some new pins for my pedals, if you are buying them for looks i wouldn't bother as the blue just rubs off even on first ride, plus takes forever to take old pins and put new pins in about a hour on each pedal takes the piss really, plus i hat to put some lock and seal stuff on the pins to stop them spinning off as that happens to my old pins lost lots as dmr don't coat the pins bad dmr.
06 June 2013
Rated 3 out of 5 by Anonymous disappointing
I bought a red set of these to swap with the standard blue pins which came with a brand new pair Black Vaults. this is the colour of the bike so i thought it would look cooler to carry on the black/red theme to the pedals.
I was somewhat disappointed to see that a lot of the new red pins were already chipped and flaking before they even came out of the packet. kind of made a cool set of new pedals look tatty and old before they were even put on the bike. i'll try a red permanent marker pen on them to see if that covers up the chips.
it took me about 45-50 minutes or so to swap all the pins so not a 5 minute job.
01 June 2012