TRS (Trail Security) components are designed to fill the expanding Enduro and All Mountain categories. Engineered to take extreme punishment dealt by riders on enduro bikes, yet they are still light enough to use on XC specific bikes.
TRS Race Hub Specs:
Fully sealed bearings
EXAr flanges and carbon centre section
Weight 175g (front), 335g (rear)
EXAr Aluminium with LEX extrusion technology.
New EXAr aluminium rim profile increases wheel performance with greater stiffness and better durability
Includes XD freehub body, alongside the standard freehub body fitted to the wheel.
A basic shake and bake blend of 8 special herbs and spices (Silicon, Iron, Copper, Manganese, Magnesium, Chromium, Zinc, and Aluminium.) It comes in three different performance blends: EXAr, EXA+ and basic EXA.
Our indestructible freehub rachet mechanism. All of our hubs have a blazing fast 6 degrees and 60 points of engagement to get you the best acceleration on climbs and out of tight corners.
Angular Contact Bearings
Angular contact bearings are supported by a thick section of bearing race on either side, as well as top and bottom. These bearings are designed to support 'combined loads' in both the axial (turning) and radial (accelerating) directions.
Triple Start Thread
The reverse thread nut on our hubs has 3 threads for more strength, and only requires a hand tightened twist for adjustment.
E*thirteen Tubeless compatible rim profiles have tubeless bead features designed in, so your tubeless tyres set up easily and stay in place without those embarrassing 'burps' during high speed corners.
Our new LEX and LEXe processes yield rims thaty are strong enough to cross any terrain you can throw at it.
Buy E Thirteen TRS Race MTB Wheelset from Chain Reaction Cycles, the World’s Largest Online Bike Store.
Can you please tell me which axle types these wheels are compatible with? I plan to use them with 15mm front and QR rear but if I can swap them onto my enduro bike with 15mm front and 12x142mm rear then all the better.
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod117968/question/1393440/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod117968%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1393440&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__
For this wheelset the following is included 'in the box' -
Front wheel pre-installed with 20mm end cap plugs Rear wheel pre-installed with 142x12mm end cap plugs
135x12mm rear end cap plugs included. QR rear end cap plugs included. 15mm front end cap plugs included. XD freehub driver (for SRAM 11-speed). instruction manual. tubeless tape (installed) and valves included.
Additional information about CRCAndyC could not be loaded.
3out of3found this answer helpful.
Was this helpful?helpful3unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod117968/answer/1359082/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod117968%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1393440%26expandanswer%3D1359082&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__