This is the most common of the integrated/internal headsets. Using the 36/45 deg bearing size. This is the one you’re usually going to see in MTB frames. Super low 11mm stack height. Only available in black.
Endura Chainstay Protector Features:
FNeoprene clothing for the bike.
Protects against chips and scratches caused by chain slap.
Small: 70mm Wide (A) x 245mm Long (B)
Medium: 90mm Wide (A) x 245mm Long (B)
Large: 120mm Wide (A) x 245mm Long (B)
X Large: 140mm Wide (A) x 245mm Long (B)
Buy Endura Chainstay Protector from Chain Reaction Cycles, the world's largest online bicycle store.
Rated 4 out of 5 by rewwerty Работает
Установил сию вещь на нижнем пере non-drive стороны фрирайд-хардтейла, так как задевал перо обувью и сдирал краску. (На драйв-стороне - другая защита.)
Месяц задеваний - всё отлично.
Надпись "Endura" работает как светоотражатель. Смотрится хорошо.
Так что отзыв - положительный:)
11 January 2014
Rated 5 out of 5 by vertolet хорошее качество / high quality
размер подошел почти идеально, но лучше взять с запасом в 1-2 сантиметра / size was almost perfect, but better to take with a margin of 1-2 cm
18 December 2013
Rated 1 out of 5 by Anonymous Wore out very quickly
I bought two of these in different sizes to cover my downhill bike chainstay and seatstay- an XL and Medium respectively. They are both made from the same material cut to suit different diameter tubes. The XL protector developed holes after only 4 days of shuttling. I have rotated the protector around the tube to extend the life but the chain continues to punch holes through the material. This protector may be suitable for an xc or road bike but not for anything else. I have a Lizard Skin protector on my AM bike which I've had for at least 3 years without problems. This protector is made from thicker material.
Either look elsewhere for a decent protector or use the cheap option and cover your stay with a used inner tube.
25 June 2013
Rated 5 out of 5 by Anonymous finally a review thats actually useful
I bought the Large size and it fits the 2012 GT Avalanche 1.0 perfectly. Do note that the 2012/2013 models have the rear derailleur cable routed along the chainstay.
20 March 2013
Rated 5 out of 5 by Anonymous Worth having
Does what it says, should have got it straight after I bought the bike as it's surprising how much damage a bit of chain slap will do. Needs to be a tight fit so took me 5 mins to put on. Also tried a Lizard Skin, marginally prefer this as it's not quite as bulky and fits more snugly.
16 September 2012
Rated 5 out of 5 by Anonymous nice
got this to replace a lizard skin which was just too small. a good size for my bike and looks good.
25 May 2012
Rated 4 out of 5 by Anonymous I think this Endura product is just as good as their other stuff.
Well fitting, logo that lasts, does it´s work well at a nice price.
12 April 2010