home_icon
The World's Largest Online Bike Store
    • Ezra Convertible Freecoaster Hub

      • Currently Unavailable
      • We’re very sorry but we don’t know when this item will be back in stock.

Stronger and lighter than other freecoatster designs; this amazing hub also converts to cassette or freecoaster in a few easy steps.

Specifications:

  • Weight: 16 oz.
  • Non drive side cone nut: cnced 7075 t6 alloy m14x1.0 thread
  • Axle: 4130 heat treated hollow chromoly precision cnced axle. The axle is broached at each end to accept an 8mm hex key/allen wench to make disassembly easier. M14x1.0 threads
  • Hub bearings: precision sealed 6902rs2 sealed bearings. Some hubs use a smaller bearings but these prove to be one of the best lasting bearings
  • Hub shell: forged then cnced from 6061t6 alloy. 36h. Features a groove to accommodate the eastern pop-n-lock hubguard.
  • Ratchet ring: heat treated chromoly. Just the right hardness to never wear out
  • Clutch spring: custom precision made spring to allow just enough tension to get the pawls moving
  • Clutch disc: delrin precision cnc clutch disc
  • Clutch disc pilot spacer: CNCed 6061 alloy
  • Backside driver bearing: precision sealed 6802rs bearing. Deep grooved to provide plenty of lateral strength.
  • Pawls: precision cnced pawls. 3 per hub. These are used in the cassette & the freecoaster mode
  • Retention springs(used in freecoaster mode): precision custom made retention springs provide just enough down force to keep the pawls out of the way in freecoaster mode.
  • Driver: 9 tooth 4130 heat treated chromoly driver precision cnced
  • Driver bearing spacer: cnced bearing spacer
  • Frontside driver bearings: precision sealed 6802rs2 bearings. Deep grooved to provide plenty of lateral strength. 2 are used under the chain to add strength.
  • Drive side cone nut: cnced 7075t6 alloy
  • Expansion springs: expansion springs are also custom made to push the pawls up with you use the hub as a cassette
 

VIEWING