Fox Suspension Float RP23 Adaptive Logic BV Rear Shock
Weight: 0.46 lbs / 208 g (6.5" x 1.5" no reducers)
Adjustments: Rebound, ProPedal on/off, 3 Position compression adjust, 3 Position compression adjust, Air spring pressure, High Volume
Adaptive Logic: With the flick of a switch, the rider goes from the stiffest level of ProPedal—or 'climb mode'—to their preferred level of open—or 'descend mode'. Three levels of descend mode adjustability allow the rider to adapt to any trail condition for optimal traction and control.
Riding Style: XC, Trail, All-mountain
Buy Fox Rear Shocksfrom Chain Reaction Cycles, the world's largest online bicycle store.
Rated 5 out of 5 by Anonymous MORE THAN SUPERB
Absolutly AMAZING. Mine is 190mm x 51mm medium tune / rebound 200 lbs boost valve. Fitted to a Giant VT frame. Replced a Manitou 3 way swinger which I thought was good. This though is FANTASTIC. The full pro pedal setting (No3) is no way a lock out but helps drive the bike forward like a turbo boost. It still tracks the ground a deals with technical rocky sections well. Flick the switch the other way (your preferred lesser pro pedal or none) and yet get amazing downhill grip / stability / poise. Interestingly I needed 195 lbs of air when in the past (Manitou) used only 150 to gain 25% sag. I got mine here at CRC then went to TF tuned to get the HD mount kit and spacers. Can't tell you how little I paid in any case it wasa steal. But at £267 still a bargain. Just get one the best really is FAB!!!
21 February 2013
Rated 5 out of 5 by Anonymous When I ordered this shock I was very sceptical about the extra money for the fancy coating. I had to buy a new shock as mine was damaged beyond economical repair. Essentially the coating makes the surface a lot more resistant to damage although I can't comment on this aspect I can say it looks bling. What I can vouch for is the lower stiction. This shock is buttery smooth compared to the standard rp23 that it replaced. I did find that it was a bit of a chore to get it setup exactly how I like it but once I got it dialed it is easily worth the money.
Top marks fox!!!!
27 December 2012
Wird der Dämpfer mit Buchsen für den Einbau geliefert? Ich fahre den Fox Float RP2 Bootsvalve 190 mm, Boots Valve Tune 175, Rebount Tune "L", Velocity Tune "M". Passt der RP 23 als Ersatz für den RP2 ?
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod90530/question/989499/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod90530%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D989499&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__
Servus, der Dämpfer kommt ohne Buchsen. Die muss man separat dazu bestellen.Zu Deiner zweiten Frage, würden wir Dir sehr gerne weiterhelfen. Meld Dich doch bei uns mit einem Bild Deines Rahmens und dann können wir Dir mit einem Ersatzdämpfer weiterhelfen. email@example.com Merci!
Additional information about CRCRosie could not be loaded.
0out of0found this answer helpful.
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod90530/answer/932245/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod90530%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D989499%26expandanswer%3D932245&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__