Rated 5 out of 5 by Anonymous Not pretty but 100% functional
Despite the warnings I fitted this to my Marzocchi 2012 corsa sl fork with a mono-mini caliper. No problems at all. Usual hope quality, recommended.
20 March 2013
Rated 5 out of 5 by Anonymous Good product, if you have 180mm or less PM fork.
The +20mm is not +20mm of your IS brake setup, it is +20mm of what the PM fork is made for!
So if your fork is made for 180mm, you need 180mm+20mm= 200mm disc.
If your fork is made for 200mm and there is no 220mm disc for your caliper, do not buy this adaptor! Then you need new brakes instead :-P (or a different fork).
06 June 2012
Rated 5 out of 5 by Anonymous It Works
If your forks are Post mount and your brakes are IS then you need an adaptor, i got this one. It works and it's well made so i guess it shouldn't get anything other than 5 stars. Plus you can/have to run a bigger rotor so your brake will seem more powerful
20 June 2011
Rated 5 out of 5 by Anonymous FANTASIC BIT OF KIT
I NEED THIS ADAPTOR WHEN I UPGRADED MY FORKS FROM 03 Z3'S TO MANITOU STANCES.
WOKED A TREAT VERY HAPPY AS HOPE ARE THE ONLY BRAKE COMPANY THAT DO THIS TYPE OF ADAPTOR. I HAD A MINI IS MOUNT AT THE TIME. THIS ADAPTOR ALSO FITTED 06 MX COMP BOMBERS
AND AS FOR THE MUPPET THAT THINK AVID DO THIS ADAPTOR THEY DONT!!!!!!
02 January 2010
Rated 5 out of 5 by Anonymous Hope IS to Post +20mm
Fitted my 2007 Marzocchi 4X WC fork just fine. Needed shimming a bit to raise the back of the Mono Mini caliper, but thats normal. Proper job!
15 May 2009
Rated 5 out of 5 by Anonymous Works with my forks!!
Have used this adapter to mount IS Hope Mono Mini with 180 MM rotor to a 2008 Marzocchi 55 ATA 2.
Works a treat, no filing or messing about needed. Oh and the 55's have been as good as gold also by the way so they can't all be bad!!
25 November 2008
Rated 4 out of 5 by Anonymous using this adaptor with 2008 marzocchi forks
I bought this adaptor to fit my HOPE mono M4(number 3caliper) brake to my new 888's after reading the reviews posted here. This adaptor will not work with 2008 888 forks, it pushes the caliper too far out meaning you'd need a 243mm rotor which HOPE don't sell.
08 June 2008
Rated 3 out of 5 by Anonymous thanks just done the upgrade i found if you put a washer between the fork and the bracket you dont have to take as much off the bracket.this does work with tiny work really im happy
14 May 2008
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod13735/question/1005701/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod13735%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1005701&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__