Look's DCS cleats have been optimally designed for excellent mud dispersal and gives a large contact surface between cleat and pedals. Supplied with wedges to increase or decrease shoe sole/pedal contact and are compatible with all types of soles.
Entry / Release hardness: hard
Cleat with optimised design for excellent mud dispersal
Wedges with non-slip properties, compatible with all types of soles
entry / release hardness: hard
material: injected steel
angular movement: ± 3°
lateral movement: ± 1 mm
cleat removal angle: 15°
weight: 34 g per pair with screws
2 red 0.5 mm elastomer wedges
• 2 black 1 mm elastomer wedges
• 2 black 2 mm composite wedges
• 4 screws + 4 elastomer pads
ADJUSTMENT OF S-TRACK CLEATS: -
The S-Track range offers:
- a 200 mm² cleat-pedal bearing surface in all circumstances using the 2 mm wedge
- an additional crampon-pedal bearing surface of 460 mm² with a simple adjustment
Procedure: For the most demanding mountain bikers, a simple adjustment is possible by sliding the wedges of different thicknesses (0.5 mm - red - / 1 and 2 mm - black) under the cleat, without the need to remove it completely. This ensures that cleat height is adjusted to obtain perfect contact between the crampons (regardless of the type of shoe) and the pedal.
Advantages: The main advantage of this operation is the significant increase in the bearing surface - 460 mm² - for unequalled power transfer, which makes the S-Track a formidable XC weapon.
Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.