Rated 5 out of 5 by mpowercustoms Mavic Cassette Spacer
Mavic Cassette Spacer
12 February 2014
Rated 5 out of 5 by LeGrimpeur Quality Spacer
Quality 1.75mm spacer which comes as standard with mavic wheels. Does not corrode. Always handy to have a few spares, if needed.
29 January 2014
Rated 5 out of 5 by Yepp Great!
Works perfectly at an affordable price, saved a lot of money too buy this spacer =).
02 November 2013
Rated 5 out of 5 by Anonymous Mavic Spacer M40417
The description is not correct. This is a 1.75mm spacer to allow Shimano 8,9 or 10 speed cassette to be installed on an Mavic M10 freehub as found on aksium, ksyruim, cosmics etc. It is the genuine Mavic part number M40417 and does exactly what I needed it for.
Note if using a 10 speed shimano cassette you also need the 1mm spacer that came with the cassette. If 8/9 speed no 1mm shimano spacer is needed.
The parts are installed with mavic 1.75mm spacer first, then shimano 1mm spacer on 10 speed systems, then cassette.
16 April 2012
Rated 5 out of 5 by Anonymous Very handy and used more often than you'd think!
This item came with a set of Mavic Crossride wheels I upgraded one of my bike with. On reading the instructions it looks like it says it's not needed with a 8/9 speed cassette but without it my SRAM PG970 was flapping about all over the place. Once I fitted this ring it was all good and everything was tight and solid.
05 July 2011
Rated 5 out of 5 by Anonymous A must have
Fitted to a Mavic Crossride wheel this solved the problem of a loose cassette, my 9 speed Shimano SLX cassette was loose and although a plastic spacer worked for a while it soon cracked and became loose again. this spacer fits perfectly over the feehub before putting on the casstte and everthing tightens up nicely.
17 June 2011
Rated 5 out of 5 by Anonymous ★★★★★ Super Hoop ★★★★★
Simple - You cant fit an 8spd cassette to a 9/10 speed hub without one of these aluminium rings. If like me you live in the past and want or need to run an 8spd cassette - you are gonna need one of these if you actually want to tighten it all up!
27 February 2011
Rated 5 out of 5 by Anonymous You never Know where you will need it, even if one of your friends will need it and use for you!! :)
09 April 2010
I was advised that I would need one of these to fit the Shimano XT M771 10 Speed MTB Cassette to my Nukeproof rear wheel, however when I fit the spacer as described in the product description (ie fitted onto the hub before placing on the first section of the cassette) the whole cassette will not fit on the hun particular when the supplied spacer is used (this needs to be in the correct position after the first single sprocket else the first two single sprockets just touch and your unable to change gear). So do I need this spacer (The whole cassette fits on the hub when used only with the supplied spacer), or do I replace the supplied spacer with the above spacer?
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod25399/question/1240384/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod25399%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1240384&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__