home_icon
The World's Largest Online Bike Store

Currently unavailable

We don't know when or if this item will be back in stock.

NS Bikes Rotary Rear Singlespeed Pro Hub

The Rotary is a real street/dirt mountain bike disc brake SS hub (135/10) using pure bmx technology. Say no to the heavy hubs taken straight from bmx catalogues with tiny & weak driver bearings & weak 3/8" axles. The Rotary hub is so light because we decided to shave any unnecessary weight to the limit without sacrificing the strength at all.

Instead of a long and weak 3/8” axle we used a bigger diameter alloy 7075 axle & steel hardware on the drive side to make it almost indestructible. No more adjusting, no more unscrewing or stripped cone nuts - they are slip-on. No external threads to damage. Hollow 3/8” bolts with 17mm hex heads & 8mm Allen hex sockets will fully immobilize your wheel in the dropouts. The driver runs on a bushing eliminating the need to use tiny and week bearings. It’s strong as hell and run smooth. Engagement is really good – this hub won’t skip.

Features:

  • material: 6061 alloy body, 7075 alloy axle & left cone, steel drive side hardware & bolts
  • O.L.D 135mm
  • compatible with all mtb frames (O.L.D 135 x 10mm or 3/8”)
  • female oversize axle system side bolts - this solution rules as it’s light & strong!
  • hollow alloy 7075 axle
  • 2 sealed bearings (main hub bearings) & special light & strong bushing system inside driver
  • bolts: hollow, 17mm hex head and 8mm Allen hex sockets, 3/8”x24tpi thread
  • 10T driver using bushing
  • 3 pawls with 30 engagement points / each 12°
  • slip-on cones, nothing to be adjusted, steel on drive side and alloy on disc brake side
  • disk brake mount IS (International Standard / 6-bolts)
  • available in 32h and 36h versions
  • weight: ~395g

Buy NS Bikes Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.

VIEWING