• Nukeproof Generator Rear MTB Hub - 135mm x 12mm 2012

      • Currently Unavailable
      • We’re very sorry but we don’t know when this item will be back in stock.

Nukeproof Generator Rear 135mm x 12mm 2011

Nukeproof Generator hubs are essential components for any high-grade wheelset, providing smooth and long-lasting bearing performance, a light weight that belies their ability to take hard knocks and enough axle options to satisfy every riding discipline and every rider.

A tough but lightweight 7075-series aluminium main hub body features cold- forged construction for optimum strength and fatigue resistance while extensive CNC machining shaves excess weight without compromising structural integrity.

Featuring a bold new graphic scheme, Generator hubs are available in various colour finishes.

The Generator rear 135mm x 12mm has been designed to fit frames with a 135mm hub spacing and make use of a 12mm thru-axle, and is built to take the punishment of DH racing while still retaining the light weight necessary for all- round riding.

The hub features a total of five sealed cartridge bearings two on the drive side to help spread the loads of pedalling forces through the hub, one on the non- drive side and a further two in the freehub body.

A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.

These hubs feature six pawls with leaf springs which are located in the main hub body for ease of maintenance. These engage into a 30-tooth steel ratchet in the alloy freehub body for additional strength and increased leverage ratio which provides positive engagement and super fast pick up for increased acceleration.

The alloy cassette carrier has been cold forged with extensive CNC machining to exacting tolerances and features a hard anodized finish for durability and strength.

Weight for the Generator 135 x 12mm rear hub is 300g.

Nukeproof Generator Rear 135mm x 12mm 2011 Features:

  • 7075 alloy main hub body
  • 7075 alloy sub axle
  • Alloy freehub body with 30T steel ratchet
  • 6 Pawls with leaf springs
  • 4 x Sealed 6902 & 1 x sealed 15268v bearings
  • 32-hole
  • Width: 135mm
  • International Standard 6 bolt disc brake interface
  • 67mm flange diameter
  • Spoke PCD 58mm
  • 34.5mm non-drive side centre-to-flange diameter
  • 19mm drive side centre-to-flange diameter
  • 15.3mm end of axle to disc mount face
  • Weight: 300g

Nukeproof Generator Rear 135mm x 12mm 2011 Specifications:

  • Weight: 300g
  • Width: 135mm

Buy Nukeproof Generator Rear 135mm x 12mm 2011 from Chain Reaction Cycles, the world's largest online bicycle store.

  • Delivery costFREE
  • Delivery toUSA
  • 365 Days return or exchange

    If you're not completely satisfied with an item you may return it within 12 months of purchase. We'll give you a full refund if the item hasn't been used or the component hasn’t been fitted.

    More information on returns
  • Pay by PayPal, Bank Transfer or Card


Buying Guide

  • We've got everything you need to know in our buying guide.