• Nukeproof Generator Rear SC MTB Hub - Ex Display 2013

      • Currently Unavailable
      • We’re very sorry but we don’t know when this item will be back in stock.

Nukeproof Generator Rear SC MTB Hub - 135mm X 12mm – Recycled

Recycled items have imperfections or suffered wear during the course of sale here at Chain Reaction Cycles. They include Ex-Display, Ex-Demo, Cosmetic Damage or Refurbished items that have been returned by customers, repaired by suppliers or have scratches or minor damage from transport or display.



  • Item was previous on display within CRC showroom
  • May show signs of handling and storage
  • Item shows minor marks and scuffs due to display handling
  • New and unused
  • Fully inspected prior to sale
    **Please note: Item is a Short Cassette hub. Thru axle NOT included**


    Nukeproof Generator Rear SC MTB Hub - 135mm X 12mm
    New for 2013 the Nukeproof Generator short cassette (SC) rear hub has been designed specifically for slope style, 4X, trials and dirt jumping disciplines where riders seldom need the full range of gears across a 9 or 10 speed cassette.
    With the short cassette design we have been able to increase the hub flange distance which results in building a stronger wheel whilst the shortened freehub body still provides adequate space to allow you to run the top 7 cogs on a 10 speed cassette or the top 6 cogs on a 9 speed cassette.
    Featuring a 135mm x 12mm bolt-thru hub body with steel cassette carrier, the Generator SC is engineered from tough but lightweight 7075-series aluminium. Cold-forged construction delivers optimum strength and fatigue resistance while extensive CNC machining shaves excess weight without compromising structural integrity.
    The hub features a total of four sealed cartridge bearings: one on the drive side, one on the non-drive side and a further two in the freehub body.
    A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.


  • 7075 alloy main hub body
  • 7075 alloy sub axle
  • Alloy freehub body with 30T steel ratchet
  • 6 pawls with leaf springs
  • 3 x Sealed 6902 & 1 x sealed 15268 bearings
  • 32-hole
  • International Standard 6-bolt disc brake interface
  • New graphics for 2013
  • Designed to fit frames with 135mm x 12mm thru-axle hub spacing. Short Cassette body is designed for use with 7-10speed cassette cogs or 6-9speed cassette cogs


  • Width: 135mm x 12mm
  • 67mm flange diameter
  • Spoke PCD 58mm, spoke hole diameter 2.3mm
  • Left side Axle edge-to-flange diameter: 35.5mm
  • Right side Axle edge-to-flange diameter: 37mm
  • 15.3mm end of axle to disc mount face
  • Weight: 325g
    **NB: Item is a Short Cassette hub. Thru axle NOT included**

    • Delivery costFREE
    • Delivery toUSA
    • 365 Days return or exchange

      If you're not completely satisfied with an item you may return it within 12 months of purchase. We'll give you a full refund if the item hasn't been used or the component hasn’t been fitted.

      More information on returns
    • Pay by PayPal, Bank Transfer or Card


    Buying Guide

    • We've got everything you need to know in our buying guide.