Rated 4 out of 5 by Bigfella123 Not bad for the price
I found this rotors to be good for the price and work well with the deore hydraulic disk brakes, I found the texture to be slightly rough but over all not too shabby.
29 January 2014
Rated 3 out of 5 by Anonymous Bent
Just got them out of the box and they're bent slightly, so I'm gonna have to bend them back. Braking is pretty good, better than the Tektro rotors, but I expected the new Shimanos to be straight at least.
10 September 2010
Rated 5 out of 5 by Anonymous fantastic value
been running this item for a few months now and I can't see the catch - why is it so cheap? OK so it isn't the lightest, and doesn't have pretty curves round the edges, but it seems to offer superb value for money
15 September 2009
Rated 5 out of 5 by Anonymous zufrieden
26 August 2009
Rated 4 out of 5 by Anonymous solid!
The rotor is very solid and is not likely to bend. Doesn't heat a lot too compared to some much more expensive ones. Be warned, this does not come with the key, so you'll need a special screwdriver to install that. Comes with the triangilar bolts and 3 pads you need to bend to be sure you bolts won't unscrew by itselves.
12 May 2009
Rated 5 out of 5 by Anonymous FANTASTICO!!
HOY ME A LLEGADO EL DISCO SHIMANO Y LO HE MONTADO A LA BICI RAPIDAMENTE Y SE A DADO LA CASUALIDAD QUE AQUI EN INGLATERRA A NEVADO MUCHO LOS DO ULTIMOS DIAS Y LO HE PUESTO A PRUEBA!!EN REALIDAD UNA PASADA" DE DISCO FRENA A LA PRIMERA NO HAY NINGUN RUIDO DE ROCES O ALGO SIMILAR EN RUIDOS NI TAN SIQUIERA SE A OXIDADO AL DIA SIGUIENTE,EL DISCO PESA 150GRAMOS 50 GRAMOS MAS QUEL AVID QUE TENIA PUESTO PERO TEN ENCUETA POR £8 LIBRAS MAS O MENOS 7 EUROS VALE LA PENA!!Y 50 GRAMOS MAS DE PESO EN LA BICI NO SE NOTA NADA,SEGURO QUE LO NOTAS MAS CUANDO TU BICI ESTA LLENA DE BARRO JA JA, OTRA COSA EL DISENO DEL DISCO ES MUY GUAPO LA FOTO ARRIBA SE VE MUY BASICO PERO EN REALIDAD NO LO ES.
08 February 2009
Rated 5 out of 5 by Anonymous great rotor
sure its not one of those fancy ones with all the spider web patterns laser cut into it but it performs brilliantly. within 3 rides of my bike with the standard rotors on it they got warped and bent so i had to go to their store and was going to get a 25pound pair but then the guy showed me these for about a tenner and im much gladder that i got these. i was a bit worried about them at first cos they felt quite rubbish at first and hardly braked at all but after a full pulls they worked brilliantly. i run these on mechanical hayes mx4's and they work better than some hydraulic discs.
would definitely recommend these.
02 January 2009
Rated 3 out of 5 by Anonymous Straight, but heavy
few holes drilled in this rotor, as a result they are heavier than many other rotors. Get the formula oro rotors, straight and lighter.
27 September 2008
Was this helpful?helpful0unhelpful0http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod815/question/1208866/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod815%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1208866&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__
The BR-M445 brake ran the RT53 rotor as standard, which was a centrelock rotor (rather than 6-bolt). Profile depth is much the same on this RT61, so if you require a 6-bolt rotor this should be fine, yes.
Additional information about CRCHops could not be loaded.
0out of1found this answer helpful.
Was this helpful?helpful0unhelpful1http://answers.chainreactioncycles.com/answers/5230-en_gb/product/prod815/answer/1156165/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fanswers.chainreactioncycles.com%2Fanswers%2F5230-en_gb%2Fproduct%2Fprod815%2Fquestions.djs%3Fformat%3Dembeddedhtml%26scrolltotop%3Dtrue%26expandquestion%3D1208866%26expandanswer%3D1156165&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__