Light pump for mountainbiking with high volume per stroke at short length. Features: • With mounting clip and dust cap • Length: 210mm • Weight: 115g • Dust protected valve head • Output max: 6 bar / 85 PSI
Rated 3 out of 5 by Anonymous Could have been a bit better
I got this pump for about 8 Euros. I guess I could've just bought one off CRC...
The thing is, you need to hold it in 1 position whilst pumping, because, as in my case, it actually snapped where the valve goes in, the thread I mean. It's quite the downer because of that. I would give it a 4/5, but then again, it does also lack a valve lock. I really wanted to use this for years to come, I only got 2 pumps out of it and now I'm hoping it holds out.
28 March 2012
Rated 2 out of 5 by Anonymous No hold. Barred.
Because the pump merely sits over the valve stem and does not grip it, pumping up a flat tube becomes difficult as the stem disappears into the rim. Ten minutes of roadside faffing did not please this reviewer, nor did it pump up the tyre. Eventually I used the car compressor.
Comes with a frame clip, works with Presta and Schrader and is probably fine for top-ups, but a frame pump needs a flip-clip to hold the valve stem, otherwise, flats will stay flat. That, as they say, is no fun.
25 November 2011
Rated 1 out of 5 by Anonymous failed from new
I bought this for my wife's bike and it failed from the first pumping.
27 May 2011
Rated 5 out of 5 by Anonymous Value for money
Give mine to the brother in law starting out after 5 years of loyal use.
Takes about 250 pumps to 40PSI for a 26" 2.0"
Got the normal single flip over connector.
Up graded to a fancy mini pump that wont pass 20PSI!
Strong, Buy one
26 July 2010