4 answers

Hollow Tech chainset ?

can you advise which Hollowtech chainsets are compatible with 7 - 8 speed rear cassettes (Ultegra rear mech) please.

Perhaps I could buy a Hollowtech crankset separately from the rings ?

rgds RoyH

Age: 65 or over

Gender: Male

Attitude: Just for Fun

Products related to my question

Shimano Tiagra 4600 Double 10sp Chainset

(2)

8 months ago

by

royh

HOOK,GB

Answer this question

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

1I have this question too

Answer:

Hi there, doesn't look like you can get it here but the closest match is this:
http://www.chainreactioncycles.com/shimano-alivio-m410-square-taper-triple-chainset/rp-prod46025

Age: 35 to 44

Gender: Male

Attitude: Passionate and Obsessive

7 months ago

by

Dobbo

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

Social Answering Subscriber
Passionate and Obsessive

Answer:

the problem of compatibility arises only for cassette 9, 10 and 11 speeds, because the chains are thinner and would not go on the front chainrings. your chain that is wider enters on all the front chainrings. Thinner ones must be more resistant, with use of better alloys, therefore more expensive. you do the math! ...

Age: 45 to 54

Gender: Male

Attitude: Passionate and Obsessive

2 months, 1 week ago

by

Smarrell

MONTESILVANO,IT

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

Passionate and Obsessive

Answer:

pretty much any chainset designed for a geared bike will run 7/8 speed set up as 7/8 speed chains are a wider chain, you would only have an issue with the chainrings "grabbing" if you used a 7/8 speed chainset with a narrow chain (9/10/11 speed)

Age: 25 to 34

Gender: Male

Attitude: Passionate and Obsessive

2 months, 1 week ago

by

gingerprince

newport pagnell,GB

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

Social Answering Subscriber
Just for Fun
On the up

Answer:

There's no reason not to use the hollowtech chainsets with 7- or 8-speed casettes and chains. The chainrings will be slightly narrower than necessary, as they're designed for either 9- or 10-speed chains, but it won't actually cause you any problems. Of course, you could mount 7- or 8-speed chainrings on the cranks, assuming the BCD (bolt-circle-diameter) is the same, but there wouldn't really be any advantage to doing so.

Age: 35 to 44

Gender: Male

Attitude: Just for Fun

2 months, 1 week ago

by

Jimothy

Cardiff,GB

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

Has staff answer

2 answers

Quastion about Brakes Formula R1S

I have a quastion about brakes Formula R1S - which calipers they have?

I read one comment about them, man said taht they have RX calipers..
(The picture and description shows an R1 lever and caliper, however the caliper I received is Rx. These are OEM brakes and do not have the line shortening hardware that the normal retail product includes. This is not a good price on these brakes considering you need to buy two line shortening kits and the calipers are Rx.)

http://www.chainreactioncycles.com/ua/ru/formula-r1s-disc-brake-set-2012/rp-prod93694

Is it true or false? I will buy them if they all R1S))
Thanks for answer

Age: 17 or under

Gender: Male

4 months, 2 weeks ago

by

COmetadexter

Kiev,UA

Answer this question

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

1I have this question too

Answers

Social Answering Subscriber
Passionate and Obsessive

Answer:

RX calliper and R1 levers. You get the lever feel and function of the R1's and the excellent calliper of the RX, think of it as an upgraded RX or a hybrid brake.

ЭНДОТЕРМИЧЕСКИЙ кронциркуль и рычаги R1. Вы получаете чувство рычага и функцию R1's и превосходного кронциркуля ЭНДОТЕРМИЧЕСКОГО, думаете об этом как модернизированное ЭНДОТЕРМИЧЕСКОЕ или гибридный тормоз.

regards
Mud Plugger

Gender: Male

1 month, 3 weeks ago

by

MudPlugger

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

Staff
Best answer

Answer:

There is no such thing as R1S calipers.

R1S Brakes consist of R1 design levers and RX design calipers.

So effectively R1S Brakes is a mix between R1 and RX.

4 months, 1 week ago

by

CRCAnton

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0

Report inappropriate content

Has staff answer

2 answers

I am using manitou r7 fork but do not know which year is it. I want to convert from 160mm rotors to 180mm rotors so what adaptor should I use?

Could you pls send me the link of the adaptor?

Age: 17 or under

Gender: Male

Attitude: On the up

8 months ago

by

Spiderris

serangoon,SG

Answer this question

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

1I have this question too

Answers

Staff
Best answer

Answer:

Due to the in depth technical information that we will require to answer your question, I would ask that you contact a member of our tech team using the link below. They will be happy to assist you further.
http://www.chainreactioncycles.com/...

8 months ago

by

crcsimon

+1point

1out of 1found this answer helpful.

Was this helpful?helpful1unhelpful0

Report inappropriate content

Social Answering Subscriber
On the up

Answer:

Just forget about the below if you've already solved the matter.

It's the disk brake that decides which adaptor to use, not the fork.
Check the brand and model No of the brake first and look for the
right adaptor. It should indicate on the catalogue or whatever like
"160mm-180mm adaptor". You can probably find one on CRC site.

Make sure to choose the Post-Mount type, which is the standard
of Manitou, not the international type. Never use the adaptor of the
different brand, as it's too risky and very dangerous.

I've once done the same conversion with a Manitou fork & Avid BB7.
I got the right adaptor from CRC and it worked perfectly.

Good luck.

Age: 45 to 54

Gender: Male

5 months, 4 weeks ago

by

watanabe

-1point

0out of 1found this answer helpful.

Was this helpful?helpful0unhelpful1

Report inappropriate content

1 answer

PRO FLEX ANIMAL FULL SUSPENSION BIKE

CAN YOU HELP I NEED TO NO WHICH FRONT SHINANO DERAILLEUR I NEED
FOR THIS FRAME THANKS J/D

Age: 65 or over

Gender: Male

1 day ago

by

DIPPS

tenbury wells,GB

Answer this question

0points

0out of 0found this question helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content

1I have this question too

Answers

Social Answering Subscriber
On the up

Answer:

Any front derailleur will work as long as you get four basic things right:

Top swing
Bottom pull (or dual-pull)
31.8mm clamp diameter.
Same "speed" as your rear sprockets and chain (original spec appears to have been 8-speed)

Age: 35 to 44

Gender: Male

Attitude: On the up

1 day ago

by

Jimothy

0points

0out of 0found this answer helpful.

Was this helpful?helpful0unhelpful0

Report inappropriate content