• Thomson Elite InLine Seatpost

    • HOT PRODUCT132 people are looking at this item.

        • $71.49 71.49
        • RRP $104.49
        • Save 32%
    • Select Colour
      Select Diameter
      25.0mm
      25.4mm
      26.0mm
      26.6mm
      26.8mm
      27.0mm
      27.2mm
      27.4mm
      28.6mm
      29.4mm
      29.8mm
      30.0mm
      30.6mm
      30.8mm
      30.9mm
      31.6mm
      32.4mm
      Select Length
      250mm
      330mm
      367mm
      410mm
    • See delivery information

      Need next day delivery?

      Order in the next

      0
      Hour
      0
      Minute
      0
      Second

      and choose Next Day Delivery at the checkout

Thomson Elite InLine Seatpost

Over 40% stronger on ultimate strength test than the strongest production seatposts on the market. Over double the fatigue life of any other production models we tested.

The tube and head of the Thomson seatpost are integral-machined from one single piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight, allowing higher strength at low weights. Lightweight - approximately 188 grams (250 length) for road bikes and 228 grams (330 length) for mountain bikes. Natural ellipse bore inside tube for optimum strength to weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other brand seatposts have grip lengths of0.500 inch or more shorter than our grip length.
The Thomson seatpost design incorporates a bending fuse to prevent catostrophic failure. All other brand seatposts we tested - every one of them - failed in catastrophic failure with the seat and clamp components - and sometimes pieces of the tube and head - flying off in all directions. This type of failure would dump the rider. Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Remember all other brand posts we tested flew apart at less than 150 foot-lbs of torque. Under severe impact the Thomson seatpost would bend slightly, the ride could continue.

Features:

  • Every component of the Thomson seatpost is 100 percent American made. This includes all fasteners and forgings.
  • The Thomson seatpost has all parts captive and can easily be attached to a seat without disassembly.
  • Infinite tilt adjustment minus 5° and plus 29°.
  • Very low profile clamps - no seat interference - swivel nuts are down between the seat rails.
  • The designs and materials have passed extensive life and ultimate strength tests.
  • Every production lot of seatposts will have ultimate strength and fatigue tests performed. Our on going testing program insures that every production lot of seatposts meets Thomson standards.
  • Impact absorbing clamps - clamps, head, and assembly will spread and flex on impact to protect seat, rails, seatpost and rider.
  • Adjustments can be made to the tilt of the seat without moving the seat forwards or backwards.
  • Easy on seats - allows seat to survive heavy impact loads without bending rails.

Buy Thomson Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

  • Delivery cost $9.99
  • Delivery toUnited States of America
  • 365 Days return or exchange

    If you're not completely satisfied with an item you may return it within 12 months of purchase. We'll give you a full refund if the item hasn't been used or the component hasn’t been fitted.

    More information on returns
  • Pay by Bank Transfer, PayPal or Card

Specs

  • Colour: Black, Silver
  • Length: 367mm, 410mm, 330mm, 250mm
  • Material: Alloy
  • Diameter: 30.6mm, 31.6mm, 25.4mm, 30.9mm, 27.2mm, 27.4mm, 30.8mm, 25.0mm, 26.0mm, 30.0mm, 32.4mm, 29.4mm, 29.8mm, 28.6mm, 26.8mm, 26.6mm, 27.0mm

Interested in Thomson Seatposts?

Seatposts Buying Guide

  • We've got everything you need to know in our buying guide.

Also Consider...

Also Recommended...