• Vitus Bikes Escarpe Suspension Bike 2016

    • HOT PRODUCT30 people are looking at this item.

        • $1387.99 1387.99
        • RRP $1849.99
        • Save 25%
    • Select Colour Size Chart
      Select Wheel Size
      27.5" (650b)
      Select Frame Size
      38cm (15")
      52cm (20.5")

Vitus Bikes Escarpe Suspension Bike 2016

Proof if proof were needed that you don’t need to break the bank to ride an incredibly capable bike. Welcome to aggressive trail riding; backwoods assaults and adventures on two wheels; whatever your preference the Vitus Escarpe platform will take it all in its stride!

The Escarpe features a Manitou Minute Comp fork; Shimano Deore/FSA groupset; WTB/Novatec wheelset and Nukeproof & Vitus finishing kit to complete the package.

135mm Travel V-Link 27.5” Frame

Following a lengthy period of R&D we have taken the best attributes from our award winning Escarpe platform and fine tuned the linkage positions and leverage ratios to obtain the desired axle path we required.

The new Vitus platform features a floating horizontal shock mount (FHSM) and actual main pivot location (AMPL) designed to provide the most efficient pedalling and suspension action. This layout requires the shock to interrupt the seat-tube; our solution to this is our two-piece hollow “Clamshell” chainstay yoke which is both light and stiff.

The main pivot location is located in a fixed high and forward position in line with a 32T chain ring position, this gives natural anti squat/bob when pedalling in the most commonly used 1x 32T setup without relying on excessive chain tension and none of the related pedal feedback. Because of the main pivot location the Escarpe has 55mm of travel with a rearward axle path helping to keep your momentum.

The chainstay pivot location is placed in-line with the chainstay eliminating any force directed to the shock linkage causing the shock to compress (aka pedal bob) due to chain tension. This pivot location also maximises active suspension when using the rear brake similar to a floating brake design – but without the added weight.

The leverage rate is designed to have a falling rate to sag point then go mildly progressive; this helps the bike sit comfortably in the sag position whilst also providing a stable platform. The lower shock mount moves forward with the suspension, this helps to keep a linear rate without falling off at full travel. This movement also reduces the shock angle change at full travel reducing side loads and improving shock life and reliability.

Manufactured from 6061-T6 triple butted aluminium and delivering 135mm of fully active suspension travel via the Horst-Link 4-bar design with our horizontal floating shock mount. We have added a removable High Direct FD mount and ISCG-05 tabs to facilitate any drivetrain combination. The rear axle is the now industry standard 142mm x 12mm E-Thru platform. The frame is also Reverb Stealth ready thanks to the internal cable routing. A bolt on down tube protector adds impact resistance to the down tube and cables from rock strikes. Rear wheel travel is controlled via the RockShox Monarch RT air shock which features a custom tune and rebound adjustment.



  • Frame: Hydroformed 6061-T6 Aluminium Frame with Four-bar V-Link Rear Suspension, 135mm Travel
  • Forks: Manitou Minute Comp, 140mm Travel, TS Air spring, Ø32mm Aluminium stanchions, Compression to Lockout and Rebound damping, TPC Technology ABS+ Trail Tuned, Tapered aluminium steerer, 15mm QR Through Axle
  • Shock: RockShox Monarch RT, 190mm x 51mm, Custom tune HVI ML 380


  • Chainset: FSA Gamma Drive MegaExo, 170mm, 36tx24t
  • Bottom Bracket: FSA MegaExo (BSA)
  • Shifters: Shimano Deore SL-M610 Rapid Fire Plus, 10-Speed
  • Front Derailleur: Shimano Deore Direct Mount FD-M616
  • Rear Derailleur: Shimano Deore RD-M615 Shadow Plus
  • Cassette: Shimano CS-HG50, 11t-36t, 10-Speed
  • Chain: KMC X10, 10-Speed


  • Rims: WTB ST i23 TCS (tubeless ready), 27.5”
  • Front Hub: Novatec D811 - 6 Bolt, 100mm x 15mm
  • Rear Hub: Novatec D882 - 6 Bolt, 142mm x 12mm
  • Spokes: Stainless Double Butted
  • Tyres: Front - WTB Vigilante Comp High Grip Compound, 27.5” x 2.3” Rear – WTB Trail Boss Comp, 27.5” x 2.25”


  • Front Brake: Shimano BR-M396 Hydraulic Disc, 180mm Rotor
  • Rear Brake: Shimano BR-M396 Hydraulic Disc, 180mm Rotor
  • Handlebars: Nukeproof Riser Bar, 7075 Double Butted Alloy, 20mm Rise, 760mm Wide
  • Headset: FSA Orbit 1.5 Zero Stack (NO.57), 1.1/8” – 1.5”
  • Stem: Vitus, 3D Forged 6061-T6 Aluminium, +/- 3 Degree Rise, 50mm Extension
  • Saddle: Vitus
  • Seatpost: Vitus Alloy, 6061-T6, 15mm Offset, 31.6mm x 400mm
  • Seatclamp: Vitus QR

Weight: 14.33kg/31.59lbs (size M)

Buy Vitus Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.

  • Delivery cost $99.00
  • Delivery toUnited States of America
  • 365 Days return or exchange

    If you're not completely satisfied with an item you may return it within 12 months of purchase. We'll give you a full refund if the item hasn't been used or the component hasn’t been fitted.

    More information on returns
  • Pay by Bank Transfer, PayPal or Card


  • Colour: Black - White
  • Frame Size: 52cm (20.5"), 38cm (15")
  • Wheel Size: 27.5" (650b)
  • Gender: Male
  • Speed: 20 Speed
  • Material: Alloy
  • Fork Travel: 140mm
  • Rear Travel: 135mm

Interested in Vitus Bikes Mountain Bikes?

Mountain Bikes Buying Guide

  • We've got everything you need to know in our buying guide.

Also Consider...