Did you know that you could shop on our www.chainreactioncycles.com/us/en website?

    • Nukeproof Horizon V2 29" Boost Pair with ARD

    • HOT PRODUCT

      Over 250 people are looking at this item.

  • Nukeproof Horizon V2 29" Boost Pair with ARD

    This wheelset features a revised design for fast and smooth-rolling performance as you shred the mountain bike trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.

    Both rims have the same profile, but the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.

    Enduro ABEC 5 Bearings

    After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.

    Nukeproof Horizon V2 Hub

    The Nukeproof Horizon V2 rear hub has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.

    The 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.

    What's Included?

    Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in.

    A pair of ARD inserts are also supplied to give you maximum protection.

    By using closed cell foam technology, the A.R.D is a very lightweight tyre insert, yet it offers you lots of protection. It enables you to run your tyres at much lower pressures without risking flats, plus gives you much increased grip for thrashing around the trails. In fact, it's so good that Kelan Grant, a CRC-Mavic sponsored rider was able to complete a stage of the EWS on just his A.R.D as his tyre had split.

    A full range of spares are available to service your hub in the future.

    Spoke Lengths:

    Wheel Non Drive Side Spoke Length Driveside Spoke Length
    Front 288 289
    Rear 289 286

    141mm Rear HG / XD Conversion Kit Available Separately:

    Caps  Nukeproof Part Number        Replacement or Conversion
    Rear 141mm  NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR

    Features:

    • Rim Material: Alloy Nukeproof Blend
    • Use:MTB, All Mountain, Enduro and DH
    • Spacing: Front: 15x110mm, Rear 12x148mm
    • Wheel Size: 29"
    • Conversion Options: 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)
    • Freehub Options: Shimano HG, Shimano Microspline and SRAM XD
    • Rear Hub Engagement: 102 points of engagement (every 3.52°)
    • Inner Rim Width: 30mm
    • Outer Rim Width: 35mm
    • Rim Height: 21.6mm
    • Tubeless Ready: Yes, pre-taped and valve supplied
    • Spoke Count: 32
    • Spoke Type: J-Bend
    • Disc Mount: 6-Bolt
    • Lacing Pattern: 3x
    • Build: Hand built
    • Single or Pair: Pair
    • Weights: Front: 897g, Rear: 1146g, ARD: 144g each (Weights include tape & valve)

    Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.

    Specs

    • Colour: Black
    • Size: 15x110mm / 12x148mm
    • Wheel Size: 29"
    • Option: XD, HG, MS
  • Save 22%
    RRP £449.99
    £349.99 349.99
    Select Colour
    Black
    Select Size
    15x110mm / 12x148mm
    Select Wheel Size
    29"
    Select Option
    HG
    MS
    XD
    Email me when in stock

    Order in the next

    0
    Hour
    0
    Minute
    0
    Second

    and choose Next Day Delivery at the checkout

  • Need help? Have a question?

    Get in contact with us

    Wheels Buying Guide

    We’ve got everything you need to know in our buying guide...

Also Consider

Select Option

Please select an option

Select Option

Please select an option

From  £50.99
SAVE UP TO 22%
RRP £64.99
Select Option

Please select an option

From  £38.99
SAVE UP TO 40%
RRP £64.99
Select Option

Please select an option