• Vitus Bikes Dominer DH Suspension Frame 2016

  • Vitus Bikes Dominer DH Suspension Frame 2016

    All NEW for 2016; we have completely overhauled our highly successful Dominer DH; taking  our highly acclaimed Escarpe & Sommet platform and putting it on steroids to create the NEW Dominer DH for 2016! Having already picked up four National DH wins and a UCI World Cup in the hands of Vitus Bikes Factory Racing rider Sacha Bickerstaff – the 2016 Dominer is tried and tested to take on the gnarliest trails and mountainsides at terminal velocity!

    200mm travel V-Link 27.5” frame

    Our all NEW 2016 Dominer DH frame has been completely re-designed from the ground up! Following a lengthy period of R&D we have taken the best attributes from our award winning Escarpe/Sommet platforms and applied this to the new Dominer platform where we fine tuned the linkage positions and leverage ratios to obtain the desired axle path we required.

    • Intended use – Down Hill
    • Wheel size – 27.5”
    • Travel – 200mm, Horst link suspension with horizontal floating shock mount.
    • Recommended fork travel – 200mm
    • Construction – 6061 T6 triple butted
    • Large 15mm main axle with Collet lock security
    • Shimano 150x12 Trough axle system
    • Aggressive Down Hill Geometry (low, Slack, Long )
    • Sizes – S, M, L
    • ISCG 05-mounts for chainguide compatibility
    • Main pivot location - This is located in a forward position position, this gives natural anti squat/bob when pedalling in the most commonly used 32 to 34T setup without relying on excessive chain tension and none of the related pedal feedback.
    • Chainstay pivot location – This pivot is placed in line with the chainstay eliminating any force directed to the shock linkage causing the shock to compressing (pedal bob) due to chain tension. This pivot location also maximizes active suspension when using the rear brake similar to a floating brake design without the added weight.
    • Rearward Axle path – Because of the main pivot location the Dominer has 70mm of travel with reward axle path helping to keep your momentum.
    •  Leverage rate design - The leverage rate is designed to have a falling rate to sag point then go mildly progressive; this helps the bike sit comfortably in the sag position with a stable platform. The lower shock mount moves forward with the suspension, this helps to keep a linier rate without falling off at full travel. This movement also reduces the shock angle change at full travel reducing side loads and improving the reliability of the shock.
    • Rear wheel travel is controlled via a RockShox Vivid R2C rear shock


    • Frame: Hydroformed 6061-T6 Aluminium Frame with Four-bar V-Link Rear Suspension, 200mm Travel
    • Shock: RockShox Vivid R2C, 222mm x 70mm
    • Rear hub spacing: 150mm x 12mm
    • Bottom Bracket: 83mm BSA
    • ISCG 05 chain guide tabs
    • Seatpost diameter: 30.9mm
    • Headset size: ZS44/28.6 | ZS56/40
    • Max tyre size: 27.5” x 2.5”
    • Seatclamp size: 34.9mm

    Buy Vitus Frames from Chain Reaction Cycles, the World’s Largest Online Bike Store.


    • Currently Unavailable
    • We’re very sorry but we don’t know when this item will be back in stock.
  • Need help? Have a question?

    Get in contact with us

     Buying Guide

    We’ve got everything you need to know in our buying guide...