• Vitus Bikes Escarpe 290 PRO Suspension Bike 2015

  • Vitus Bikes Escarpe 290 PRO Suspension Bike

    The ultimate medium travel trail riding weapon, the all new Escarpe 29 Pro is the result of 18 months of development, custom tuning work from Rockshox and testing this 135mm suspension platform to the max!

    The Escarpe 29 Pro comes with a wish list components package that will leave you wanting for nothing; 150mm RockShox Pike forks, Mavic Crossmax XL wheelset, SRAM X1/X01 groupset and a Reverb Stealth dropper seatpost are all included.Pro level components; pro level performance, you deserve the best so we are offering it to you in a fully comprehensive package that is RACE READY!

    Click here to read full MBR review

    135mm Travel V-Link 29” Frame The 2015 Escarpe frame is an all new development for this season! Following a lengthy period of R&D we have taken the best attributes from our award winning Escarpe platform and fine tuned the linkage positions and leverage ratios to obtain the desired axle path we required.

    The new Vitus platform features a floating horizontal shock mount (FHSM) and actual main pivot location (AMPL) designed to provide the most efficient pedalling and suspension action. This layout requires the shock to interrupt the seat-tube; our solution to this is our two-piece hollow “Clamshell” chainstay yoke which is both light and stiff.

    The main pivot location is located in a fixed high and forward position in line with a 32T chainring position, this gives natural anti squat/bob when pedalling in the most commonly used 1x 32T setup without relying on excessive chain tension and none of the related pedal feedback. Because of the main pivot location the Escarpe has 55mm of travel with a rearward axle path helping to keep your momentum.The chainstay pivot location is placed in-line with the chainstay eliminating any force directed to the shock linkage causing the shock to compress (aka pedal bob) due to chain tension. This pivot location also maximizes active suspension when using the rear brake similar to a floating brake design – but without the added weight.

    The leverage rate is designed to have a falling rate to sag point then go mildly progressive; this helps the bike sit comfortably in the sag position whilst also providing a stable platform. The lower shock mount moves forward with the suspension, this helps to keep a linear rate without falling off at full travel. This movement also reduces the shock angle change at full travel reducing side loads and improving shock life and reliability.Manufactured from 6061-T6 triple butted aluminium and delivering 135mm of fully active suspension travel via the Horst-Link 4-bar design with our horizontal floating shock mount.

    We have added a removable High Direct FD mount and ISCG-05 tabs to facilitate any drivetrain combination. The rear axle is the now industry standard 142mm x 12mm E-Thru platform.

    The frame is also Reverb Stealth ready thanks to the internal cable routing.

    A bolt on down tube protector adds impact resistance to the down tube and cables from rock strikes.

    Rear wheel travel is controlled via the RockShox Monarch RT3 air shock which features a custom tune with rebound and two step compression adjustment.

    Features:

    Frameset:

    • Frame: Hydroformed 6061-T6 Aluminium Frame with Four-bar V-Link Rear Suspension, 135mm Travel
    • Forks: RockShox Pike RCT3 Solo Air, 150mm Travel, Ø35mm Tapered Wall Aluminium Stanchions – Low Friction Anodize Fast Black, External Rebound & Low Speed Compression Damping, Tapered Aluminium Steerer, 15mm Maxle Lite Thru Axle
    • Shock: RockShox Monarch RT3, 190mm x 51mm, Custom tune HVI ML S 320

    Groupset:

    • Chainset: SRAM X01 X-SYNC, 170mm, 32t
    • Bottom Bracket: SRAM GXP (BSA)
    • Shifters: SRAM X1, 11-Speed
    • Front Derailleur: N/A
    • Rear Derailleur: SRAM X01
    • Cassette: SRAM XG-1180, 10t-42t, 11-Speed
    • Chain: SRAM PCX1, 11-Speed

    Wheelset:

    • Rims: Mavic Crossmax XL, 29”
    • Front Hub: Mavic Crossmax XL - 6 Bolt - 6 Bolt, 100mm x 15mm
    • Rear Hub: Mavic Crossmax XL - 6 Bolt - 6 Bolt, XX1/142mm x 12mm
    • Spokes: Mavic Crossmax Crossmax XL
    • Front Tyre: Front - WTB Vigilante TCS, Dual DNA Compound, UST Aramid Bead, 29” x 2.3”
    • Rear Tyre: WTB Trail Boss TCS, Dual DNA Compound, UST Aramid Bead, 29” x 2.25”

    Components:

    • Front Brake: Shimano XT BR-M785 Hydraulic Disc, 180mm Rotor
    • Rear Brake: Shimano XT BR-M785 Hydraulic Disc, 180mm Rotor
    • Handlebars: Nukeproof Warhead, 7075 Double Butted Alloy, 20mm Rise, 760mm Wide
    • Headset: FSA Orbit 1.5 Zero Stack (NO.57), 1.1/8” – 1.5”
    • Stem: Funn Strippa, 3D Forged 6061-T6 Aluminium, 0 Degree Rise, 45mm Extension
    • Saddle: Vitus
    • Seatpost: RockShox Reverb Stealth, 125mm Drop
    • Seatclamp: Vitus QR

    Weight: 12.64kg/27.86lbs (size M – weighed without tubes)

    Buy Vitus Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.

    Specs

    • Currently Unavailable
    • We’re very sorry but we don’t know when this item will be back in stock.
  • Need help? Have a question?

    Get in contact with us

     Buying Guide

    We’ve got everything you need to know in our buying guide...